Fertilizer Calculator: NPK, Urea, DAP & Organic Rates for Any Area

Fertilizer Calculator: NPK, Urea, DAP & Organic Rates for Any Area - https://velorahomes.site/fertilizer-calculator/
RateNot rated yet

Use this free fertilizer calculator to work out how much urea, DAP, MOP, NPK or organic fertilizer to apply to any area: a farm field, lawn, vegetable bed, orchard, greenhouse or a single pot. It supports acres, hectares, m², sq ft, sq yd, marla, kanal and guntha, 65+ fertilizers, 35 crops and eight tools. Not sure of your plot size? Start with the area finder below or our Room Area Calculator. For soil preparation and plant care, read the Beginner Gardening Guide, and find more tools on the calculators hub.

1. Area Finder: Plot Size in Acres, Hectares, Marla & Kanal

Measure a rectangle, circle or triangle and get the area in every common unit. One click sends it to the calculators below.

2. Fertilizer Rate Calculator (per Acre, Hectare, Kanal, m²)

Pick a fertilizer, a nutrient target and your area. Get the quantity needed, the nutrients supplied and an optional cost.

3. Crop NPK Plan: Urea + DAP + MOP for 35 Crops

Choose a crop (typical rates, editable), a soil test level and your products. Nitrogen from DAP is counted first, then topped up with your N source.

Rates are typical agronomic ranges. Adjust using a soil test and local extension advice.

4. Fertilizer per Plant: Pots, Trees & Raised Beds

Dose a pot, a vegetable plant or an orchard tree in grams, then scale to any number of plants.

5. Liquid Feed, Greenhouse & Hydroponic ppm Calculator

Grams of fertilizer to dissolve to reach a target ppm of a nutrient in a tank, sprayer or drip system.

6. Micronutrient, Lime, Gypsum & Sulfur Calculator

Zinc, iron, boron, manganese, copper, molybdenum, calcium, magnesium and sulfur products. The rate applies to the first nutrient named in the product label.

7. Fertilizer Cost per kg of Nutrient

Compare two products fairly. The cheapest bag is not always the cheapest nutrient.

8. NPK Ratio & Bag Content Calculator

Enter any fertilizer grade (for example 20-20-20) to see its ratio and the nutrient weight per bag.

How to Calculate Fertilizer Amount

Every fertilizer bag shows a grade: three numbers for nitrogen (N), phosphate (P₂O₅) and potash (K₂O) as a percentage of weight. The core formula is:

Fertilizer needed = (nutrient target ÷ nutrient %) × 100

Example: to apply 100 kg N per hectare with urea (46% N), you need 100 ÷ 46 × 100 = 217 kg urea per hectare, which is about 88 kg per acre, 11 kg per kanal or 0.55 kg per marla.

Area Unit Conversions

Marla and kanal sizes vary by region. This tool uses 1 marla = 272.25 sq ft and 1 kanal = 20 marla.
Unitm²sq ftHectares
Acre4,046.8643,5600.4047
Hectare10,000107,6391
Kanal505.865,4450.0506
Marla25.29272.250.00253
Guntha101.171,0890.0101
Sq yd0.83690.0000836

Nutrient and Rate Conversions

FromToMultiply by
P₂O₅Elemental P0.436
K₂OElemental K0.830
kg/halb/acre0.892
lb/acrekg/ha1.121
lb/1000 sq ftkg/ha48.82
g/m²kg/ha10

Fertilizer Rates for Every Kind of Area, Soil and Climate

By Area Type

AreaUsual unitBest tool and tip
Farm fieldAcre, hectare, kanalUse the crop plan. Split nitrogen into 2 or 3 doses.
Lawn and turfSq ft, m²Use the rate tool in lb/1000 sq ft. Most lawns take 0.5 to 1 lb N per 1,000 sq ft per feed.
Kitchen garden or raised bedm², sq ftUse g/m². Heavy feeders such as tomato and cabbage need about 10 to 15 g N per m² per season.
Orchard or plantationPer treeUse the pots and trees tool. Dose by tree age and apply under the canopy edge.
Pots and balconyPer potUse small doses often, or the liquid tool for weak regular feeds.
Greenhouse and hydroponicsppmUse the liquid tool and check EC and pH of the solution.

By Soil Type

SoilWhat happensAdjustment
SandyNutrients leach quicklySplit N into 3 or 4 light doses and add compost.
ClayHolds nutrients, drains slowlyFewer, lighter splits. Avoid applying before heavy rain.
LoamBalancedStandard 2 or 3 splits.
Alkaline or calcareousHigh pH locks up P, Zn and FeAmmonium sulfate suits better than nitrate sources, band the phosphorus and add zinc or iron if a test shows a need.
Saline or sodicSalts harm rootsReclaim with gypsum and leaching first, then fertilize lightly.
AcidicLow Ca and Mg, P locked upApply lime or dolomite and use the micronutrient tool to size it.

By Climate

In humid and tropical areas heavy rain leaches nitrogen, so use more splits. In arid and semi-arid irrigated areas, apply fertilizer with irrigation and watch salinity. In temperate and cold regions apply in spring and avoid late-season nitrogen that delays hardening.

Fertilizer Types Covered

The tools include nitrogen fertilizers (urea, ammonium nitrate, ammonium sulfate, CAN, calcium nitrate, UAN, anhydrous ammonia, coated ureas), phosphorus fertilizers (SSP, TSP, DAP, MAP, rock phosphate, bone meal), potassium fertilizers (MOP, SOP, potassium nitrate, MKP, Sul-Po-Mag), organic fertilizers (cow, chicken, sheep, goat and horse manure, compost, vermicompost, oil cakes, blood meal, fish emulsion, bat guano, wood ash), micronutrient and secondary nutrient products, and 20 common NPK grades such as 10-10-10, 15-15-15, 20-20-20 and 12-24-12. Organic values vary by source and moisture, so treat them as estimates.

Safe Application Tips

Split nitrogen, water in after spreading, keep granules off wet leaves and away from stems, and never exceed label rates. Over-fertilizing burns roots and pollutes water. Pair feeding with good soil care from our home care and gardening guides and keep up seasonal jobs with the Home Maintenance Checklist.

Related Tools and Guides

Fertilizer Calculator FAQ

How much urea per acre should I apply?

Most cereals receive about 100 to 150 kg N per hectare, which is roughly 40 to 60 kg N per acre, or 87 to 130 kg of urea (46% N) per acre. Use the rate calculator for your exact target.

How much urea per kanal or marla?

At 100 kg N per hectare you need about 217 kg urea per hectare, which is about 11 kg per kanal or 0.55 kg per marla. Choose Kanal or Marla as the area unit to get exact figures for your plot.

What do the three numbers in NPK mean?

They are the percentages by weight of nitrogen (N), phosphate (P₂O₅) and potash (K₂O). A 50 kg bag of 20-20-20 holds 10 kg of each nutrient.

How do I convert kg per hectare to lb per acre?

Multiply kg per hectare by 0.892 to get lb per acre. Multiply lb per acre by 1.121 to go the other way. The rate calculator also accepts lb per 1,000 sq ft and g per m².

How much fertilizer does a lawn need per 1,000 sq ft?

Most lawns need 0.5 to 1 lb of nitrogen per 1,000 sq ft per feed. With urea that is about 1.1 to 2.2 lb of product. Choose lb/1000 sq ft as the rate unit and sq ft as the area unit.

How many grams of fertilizer per litre for a target ppm?

Grams per litre equals target ppm divided by (nutrient percent × 10). For 150 ppm N from potassium nitrate (13% N) that is about 1.15 g per litre. The liquid tool works for greenhouse, drip and hydroponic tanks.

Is DAP or urea cheaper per unit of nitrogen?

Use the cost tool. Divide the bag price by the kilograms of nutrient inside it. Urea is usually the cheapest source of nitrogen, while DAP is valued mainly for its phosphorus.

How much fertilizer for one pot or one tree?

Use the pots and trees tool. A small pot may need only about 5 g of nitrogen per season, while a mature fruit tree may take 200 g or more. Keep granules away from the stem and water in.

Can I mix organic and chemical fertilizer?

Yes. Many growers supply part of the nitrogen from manure or compost and the rest from urea or NPK. Count the organic nutrients using the averages in the tool, then use the crop plan to fill the gap.

Do I need a soil test?

A soil test is the most reliable way to set phosphorus and potassium rates. The crop plan lets you pick low, medium or high soil test levels, which raises or cuts P and K by 25% or 50%.

When should I apply fertilizer and how many splits?

Apply nitrogen in two or three doses timed to crop growth, and use three or four lighter doses on sandy soil or in heavy rain. Apply phosphorus and potash at planting or before sowing.

What changes in alkaline or calcareous soils?

High pH locks up phosphorus, zinc and iron. Band phosphorus near the roots, consider ammonium sulfate for nitrogen, and use the micronutrient tool if a soil or leaf test shows zinc or iron is low.

Estimates only. Follow product labels and local agronomic advice.

Related articles and guides

Keep growing with practical gardening and home care reads from Velora Homes.

Was this calculator helpful?

Not rated yet

Share this calculator